NASA Discount

AiM Sports MyChron5S Digital Datalogging Dash For Kart Racing Data acquisition for karts enters a totally new dimension: the AiM MyChron5S. Besides sampling all your kart data, MyChron5S features all the advantages of GPS timing and tracking, plus a lot of new functions designed to provide more complete and reliable information both during and after each race: Lap and split times Speed RPM Head, H2O, or Exhaust Temperature (or two temps with 2T!) Track Position Acceleration Much more! MyChron5S has been designed to provide both basic info (for new racers) and the most sophisticated data to karting professionals. Fully configurable layout lets you customize the data, color, LED indicators, etc. to suit your individual needs. Plus, the MyChron5S 2T adds sampling of a second temperature to the basic MyChron5S. Using a two-satellite sensor, the MyChron5 provides super-accurate GPS data for lap/split times, position, speed, etc. We have a huge track database for easy download of detailed track info. For ten years, the MyChron4 was the benchmark gauge in karting data acquisition. AiM re-establishes the benchmark with the MyChron5S -- a leap ahead of the 4 (all its imitators). At the same time, the MyChron5 is fully compatible with all MyChron4 peripherals, as well as a Lambda controller, Data Hub, MyChron Expansion, and SmartyCam. Features include: Automatic Start Rechargeable Li-Ion battery lasts up to 10 hours 1 MB memory for over 3 hours of data logging One Temperature channel (two on the 2T; both include thermocouple) Seven fully-configurable LEDs (alarm, shift, etc.) LCD screen with configurable color Wireless data download via secure Wi-Fi connection Intuitive menu design for easy configuration Call us with any questions you have about the incredible new MyChron5S from AiM Sports! * Configurable as Shift Lights or RPM/Lap Times Alert

AiM Sports MyChron5S 2T Dual-Temp Digital Datalogging Dash For Kart Racing Data acquisition for karts enters a totally new dimension: MyChron 5S 2T. Besides sampling all your kart data, MyChron5S 2T features all the advantages of GPS timing and tracking, dual-temperature inputs, plus a lot of new functions designed to provide more complete and reliable information both during and after each race: Lap and split times Speed RPM Combine EGT with either CHT or H2O temps Track Position Acceleration Much more! MyChron5S 2T has been designed to provide both basic info (for new racers) and the most sophisticated data to karting professionals. Fully configurable layout lets you customize the data, color, LED indicators, etc. to suit your individual needs. The MyChron 5S 2T comes with a Y-Cable for temperature sensors, an EGT thermocouple, and your choice of either a CHT (cylinder head temp) or H2O (water jacket) thermocouple. Using a two-satellite sensor, the MyChron 5S 2T provides super-accurate GPS data for lap/split times, position, speed, etc. We have a huge track database for easy download of detailed track info. For ten years, the MyChron4 was the benchmark gauge in karting data acquisition. AiM re-establishes the benchmark with the MyChron 5S 2T -- a leap ahead of the 4 (and all its imitators). At the same time, the MyChron5 2T is fully compatible with all MyChron4 peripherals, as well as a Lambda controller, Data Hub, MyChron Expansion, and SmartyCam. FEATURES: Automatic Start Rechargeable Li-Ion battery lasts up to 10 hours 1 MB memory for over 3 hours of data logging Two Temperature channels Seven fully-configurable LEDs (alarm, shift, etc.) LCD screen with configurable color Wireless data download via secure Wi-Fi connection Intuitive menu design for easy configuration Call us with any questions you have about the incredible MyChron5S 2T from AiM!

AiM Magnetic Pedal Position Sensor For MyChron5 The accelerator/brake pedal position sensors is a crucial support device for kart drivers. They provide a precise indication of timing and intensity of braking and/or acceleration. This permits the team to understand whether the driver has accelerated or braked at the right moment, with the correct pedal strength, across multiple laps and overlaid with other critical data. This is a very important factor in evaluating driver behavior and improving his/her performance. Data can be acquired by your MyChron5 connected to a MyChron Expansion and analyzed on your PC. Made in anodized aluminium, these sensors are very robust and water-resistant. Calibration is immediate: once installed, connect the sensors to your MyChron Expansion and get pedal positions (in high position and zero position). After that the sensor will start getting acceleration or braking data. Call us with any questions you have about the incredible new MyChron5 2T from AiM!

AiM MyChron5 Kart Racing Steering Wheel The MyChron5 Kart Steering Wheel has been specifically designed for oval karts; its shape allows a perfect view of the track and your MyChron5 is placed in the best position to keep data available at a glance. The ideal complement for your newest MyChron5, light-weight and ergonomical, it allows you to put your MyChron5 in the best position: right in front of you. You can fully access the power of the MyChron5, viewing your data at a glance while maintaining optimum driving precision. Designed with a flat bottom and curved top, the AiM MyChron5 Steering Wheel is made of an anodized aluminum frame with Alcantara grips and durable Nabuk covering on the sides. The rugged and ergonomic MyChron5 Oval Steering Wheel is a balanced mix of great design, excellent feel, and top technology all at your fingertips! SAFETY IS THE PRIMARY GOAL The outer rim has been designed without edges, to avoid any problem in case of accident. Different from traditional aluminum/steel steering wheels, the MyChron5 Steering Wheel utilizes polyurethane to minimize vibration on the driver's hands. This greatly reduces driver fatigue. The MyChron5 Karting Wheel is easy to install, resistant to all weather conditions, and jet-washable without any problem. SPECS Weight: 600g (1.3 lbs.) Diameter: 340mm (13.4 in.) Chassis: Anodized aluminum Covering: Alcantara and Nabuk Leather Call us with any questions you have about the AiM MyChron5 Kart Racing Steering Wheel from Competition Karting!

Coolshirt Youth Karting Shirt Compatible with Coolshirt's ice-water-based cooling engines, the Karting Shirt's superior moisture-wicking and anti-microbial protection keep your young kart driver cool and dry. Clean-Seam tubing sewn into interior of the garment provides great comfort. The shirt has two-foot supply/return leads, so no hoses are needed. This shirt is a perfect match with the Coolshirt Kart Bag System. All shirts have patented non-kink tubing for consistent and continual cooling. No special care is necessary with Coolshirt garments. Machine wash. Hang dry. Won’t shrink, pick, or fade. FEATURES Compatible with Coolshirt ice water-based devices, ideal for the Kart Bag System Superior moisture-wicking and anti-microbial protection Clean-Seam tubing sewn into interior of garment Machine wash and dry; won’t shrink, pick, or fade Equipped with a two-foot lead, so no hoses are needed

Coolshirt Adult Karting Shirt Compatible with Coolshirt's ice water-based cooling engines, the Adult Karting shirt features superior moisture-wicking and anti-microbial protection keep you cool and dry. Clean-Seam tubing sewn into the interior of the garment provides great comfort. The shirt has two-foot supply/return leads, so no additional hoses are needed. This shirt is a perfect match with the Coolshirt Kart Bag System. All shirts have patented non-kink tubing for consistent and continual cooling. No special care is necessary with Coolshirt garments. Machine wash. Hang dry. Won’t shrink, pick, or fade. FEATURES Compatible with Coolshirt ice water-based devices, ideal for the Kart Bag System Superior moisture-wicking and anti-microbial protection Clean-Seam tubing sewn into interior of garment Machine wash and dry; won’t shrink, pick, or fade Equipped with a two-foot lead, no additional hoses are needed  

Arai CK-6 Youth Karting Helmet The Arai CK-6 is designed specifically for junior kart racers who are too small to comfortably fit and/or support the weight of an adult model SK-6 karting helmet. Meets the SNELL/FIA CMR standard for junior karting CK-6 FEATURES SRC Superior Resin shell material, developed and formulated in-house at Arai, dramatically improves the bonding properties of standard fibers, allowing the use of less material for reduced weight and lower cost. Removable/Replaceable cheek pads in optional sizes allow for custom fit when needed. Easily removable 5mm top layer of foam allows for further custom fitting. Wide and tall eye port for an exceptional field of view. Large intake vent toggles for easy operation, with large rear vents for improved ventilation. Features taken directly from the GP-6PED auto-racing helmet. Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity. Provides a stronger shell near the opening where it's needed while lowering the center of gravity. Rise in shell above the shoulders for added clearance. SPECIAL YOUTH SIZING XXS: 50-51cm XS:   52-53cm S:     54-56cm M:    57-58cm L:     59cm An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one.

Arai SK-6 Adult Karting Helmet Being the dominant helmet on the F1 grid, winning an IRL Championship, and protecting the heads of NASCAR heroes like Gordon, Burton, and Montoya has put Arai on the receiving end of an abundance of world-class racing helmet input. The SK-6 gets the benefits of all this input. Designed by Arai specifically for karting, the SK-6 adds a ton of features and advancements to the already-impressive list of its predecessor. You won’t believe the comfort, lightness, and feeling of confidence the SK-6 gives you, thanks to its incredibly strong, proprietary cLc (Complex Laminate Construction) shell. Its strength allowed Arai to give the SK-6 an extremely soft EPS liner for better comfort and impact energy management. If you’re serious about taking your karting to the next level, choose the helmet that’s already there. Snell K2015 certified. SK-6 FEATURES Positive shield lock mechanism provides Solid latching, while allowing normal operation of the shield. Designed to be an integral component of the shield system and function, not just an add-on afterthought. The simplicity of the function masks the complexity of the design. A feature taken directly from the new GP-6PED New shield pivot hardware improves aerodynamics. Type "6" 3mm shield. Wider eye port for increased peripheral field of view. Larger intake vent toggles for easier operation. Large rear vents for improved ventilation. Features taken directly from the new GP-6PED. New "Removable/Replaceable" cheek pad design allows for custom fitting with optional thicknesses (15mm, 20mm, 25mm, 30mm). Cheek pad covers are also removable to allow for easier and more thorough cleaning. Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity. Provides a stronger shell near the opening where it is needed as well as lowers the Center of Gravity. Rise in shell above the shoulders for added clearance. An effective helmet is one that fits properly. Have an assistant use a measuring tape or a piece of string to measure the circumference of your head, starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It's a good idea to take several measurements and use the largest one.

ULTRA-LIGHT CARBON FIBER KARTING HELMET Bell Racing is proud to introduce the KC7 CMR Carbon, the first ultra-lightweight carbon fiber youth karting helmet on the market.  Based on the HP7 Formula 1 helmet, this sleek, aerodynamic design features an advanced ventilation system with 14 air intake and extraction channels designed to maximize cooling and a double screen anti-fog (DSAF) insert to prevent fogging in rainy conditions. Certified to the FIA/ Snell CMR standard designed for karting drivers under the age of 18, the KC7 CMR Carbon is a winning choice for the next generation of champion drivers. Ultra-Lightweight Carbon Fiber Shell: 2.6 lbs. (sizes 52-56) or 2.7 lbs. (sizes 57-59) Innovative shell and shield design improve acoustic Comfort, Aerodynamic Performance and Energy Absorption Design based on the innovative HP7 used in F1 Advanced Ventilation System with 14 Intake and Extraction Channels Front and Side Air Intakes Available (Sold Separately) Hollow Synthetic Rubber Gasket Seal Ensuring that Air, Water and Dust Can’t Penetrate into the Helmet Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High Velocity Impact Protection Aerodynamic Accessories including Chin Bar and Top Gurneys and Rear Spoiler (Sold Separately) for Improved Aero Performance and Stability at High Speeds Pro-Style, Multi Foam Density Interior with Superior Moisture Wicking Properties Comfort-Plus Karting Style Interior with Removable / Replaceable Cheek Pads SE07 2MM DSAF Shield (SV SE07 Pivot System) – Clear Shield Double Screen Anti-Fog (DSAF) Visor Insert For Improved Anti-Fog Performance Draw String Helmet Bag Included Hex Wrench Included FIA/Snell CMR2016 Homologation This helmet will ship to you with signature required for delivery.

Sparco Arm Restraints Most racing organizations require arm restraint systems for open-wheel or open-cockpit competition. These Sparco Arm Restraints come in three colors and have padded arm bands for additional comfort. Sparco Arm Restraint Features: Great for open-wheel cars Padded arm bands and steel hardware D-ring system allows you to adjust the arm band circumference for a comfortable fit Easy release allows quick entry and exit from driver's compartment Available in black, red or blue Meets SFI 3.3 standards

Molecule Helmet Care Kit This specially-bundled kit from Competition Karting makes it easy and safe to keep your racing helmet in top condition, clean and fresh. The light-duty Cleaner & Polish spray is designed to keep your helmet exterior shell clean, shiny and protected. Safe to use on all finishes, including flat and matte. Refresher spray keeps the inside of your helmet clean, while Anti-Fog helps to keep the inside of your visor clear. Rain Repel is excellent at keeping the outside of your visor clear and making it easy to clean off debris, bugs, etc. KIT INCLUDES: (1) Helmet CLEANER & POLISH 4 oz. (1) Helmet REFRESHER 4 oz. (1) Helmet RAIN REPEL 4 oz. (1) Helmet ANTI-FOG 4 oz.

Thermocouple extension cable with 712 3-pin male end to K-style female end. 5.00 ft. cable length.

AiM Kart Racing Steering Angle Sensor Measure and log your kart driver's steering input with the AiM Steering Angle Sensor. Includes a rotary potentiometer with a male 4-pin 719-style connector, two toothed pulleys, one toothed belt, and one sensor mounting bracket. The steering shaft pulley is designed to fit a 7/8"-diameter shaft. (Smaller shafts will need to add a bushing to fit the pulley.) This sensor is designed to measure up to five complete turns of the steering column. This sensor requires the addition of an Expansion Box or eBox when used with MyChron3 Extreme, MyChron4, and MyChron5 kart dash loggers. If your steering column is larger than 7/8", consider using the AiM String Pot Steering Angle Sensor (Part No. AIM-MC-280) instead. The String Pot can work with any diameter steering shaft.

Alpinestars Sequence Karting Neck Support Designed and developed specifically for younger riders, the Sequence Youth Neck Roll is the starting point on a junior driver’s journey to the Bionic Neck Support. Ergonomically profiled for a young rider’s body requirement, the Sequence Neck Roll’s frame is designed to transfer impact energy away from the upper neck. CONSTRUCTION New hybrid kids neck protection with extended tail for high position stability. Ergonomic designed and engineered shape to fit kids from 6 – 10 yrs. and from 10-14 yrs. Double density core is made from a soft PU foam base embedding a hard layer EVA for energy dissipation. Bottom and internal soft section (neck side) provides comfort for the shoulder and neck, hard section on the upper part to give stability and provides force distribution when the helmet is impacting. KEY FEATURES Easy to use soft strap closure on the front part. Highly compatible with all other protectors and jackets. External cover can be pulled of core for washing by Velcro opening on the rear.