OMP KS-3 MY2026 Kart Racing Shoes The OMP KS-3 MY2026 Kart Racing Shoes are designed for beginner and developing drivers who want lightweight comfort, flexible support, and dependable pedal feel. Built specifically for karting, the KS-3 combines a soft suede upper with breathable mesh inserts and a kart-specific outsole to help new racers feel more comfortable and confident behind the wheel. The forgiving upper adapts to a wide range of foot shapes, while the padded tongue and rear bellow construction improve comfort and ankle mobility. Side reinforcement adds support during braking and cornering, making the KS-3 a practical choice for rental karting, sprint karting, club racing, and recreational driving. Comfort and Control for Developing Kart Racers The OMP KS-3 MY2026 is built around the needs of drivers learning proper braking, throttle control, and pedal transitions. Its lightweight construction helps reduce unnecessary bulk around the foot, while the flexible upper allows natural movement during repeated pedal operation. A kart-specific outsole provides the grip and sensitivity needed to feel changes in brake pressure and throttle input, helping drivers develop smoother and more consistent control. Lightweight Suede Upper The soft suede upper provides a comfortable and flexible fit without sacrificing everyday durability. Its forgiving construction makes the KS-3 suitable for a broad range of foot shapes and helps reduce stiffness during longer practice sessions. Breathable Mesh Inserts Mesh panels improve airflow through the shoe and help reduce heat buildup during extended indoor and outdoor karting sessions. The breathable construction supports greater comfort when driving in warm conditions or completing multiple sessions in one day. Padded Tongue A padded tongue cushions the top of the foot and helps distribute pressure from the laces more evenly. This improves overall comfort and creates a more secure fit without excessive tightness. Flexible Rear Bellow The rear bellow construction allows the ankle and Achilles area to move more naturally during braking and acceleration. This added flexibility helps reduce restriction while maintaining support around the rear of the shoe. Supportive Side Reinforcement Reinforcement along the side of the shoe adds stability during braking and cornering loads. It also improves durability in an area commonly exposed to contact with pedals and kart chassis components. Two-Tone Karting Outsole The two-tone outsole is designed specifically for karting traction and pedal feel. Its low-profile construction helps drivers maintain a close connection with the brake and throttle while providing dependable grip during driving and movement around the paddock. Adult and Youth Sizing The OMP KS-3 MY2026 is available in adult and youth sizing options, making it a versatile choice for new drivers of different ages. Available sizes may vary by color and current inventory. OMP KS-3 MY2026 Features Designed for beginner and developing kart racers Lightweight suede upper Breathable mesh inserts Flexible and forgiving fit Padded tongue for improved comfort Rear bellow construction for ankle mobility Supportive side reinforcement Two-tone karting outsole Dependable pedal grip and sensitivity Suitable for indoor and outdoor karting Available in adult and youth sizing options Ideal for rental, recreational, sprint, and club karting Technical Specifications Product: OMP KS-3 MY2026 Kart Racing Shoes Manufacturer: OMP Product Type: Kart racing shoes Model Year: MY2026 Upper: Lightweight suede Ventilation: Breathable mesh inserts Tongue: Padded construction Rear Construction: Flexible ankle bellow Support: Reinforced side section Outsole: Two-tone kart-specific sole Sizing: Adult and youth options Recommended Use: Rental karting, sprint karting, club racing, and recreational karting Homologation: Not FIA homologated for fire-resistant auto racing use OMP KS-3 Kart Racing Shoe Size Chart Frequently Asked Questions Are the OMP KS-3 MY2026 shoes FIA approved? No. The KS-3 is designed specifically for karting and is not FIA homologated for automobile racing categories that require fire-resistant footwear. What material are the OMP KS-3 shoes made from? The KS-3 uses a lightweight suede upper with breathable mesh inserts to provide flexibility, airflow, and everyday karting durability. Are the OMP KS-3 shoes good for beginner kart racers? Yes. The KS-3 was developed for beginner and developing drivers who need a comfortable, flexible shoe with dependable support and easy pedal feel. Do the KS-3 shoes provide good pedal sensitivity? Yes. The kart-specific outsole is designed to improve pedal feedback and traction, helping drivers feel brake pressure and throttle movement more clearly. Are youth sizes available? Yes. The OMP KS-3 MY2026 is available in both adult and youth sizing options. Availability may vary by color and current inventory. Can the KS-3 be used for indoor karting? Yes. Its lightweight upper, breathable mesh, and flexible construction make it well suited for indoor rental leagues and recreational karting. Can the KS-3 be used for outdoor kart racing? Yes. The supportive construction and kart-specific outsole make it suitable for outdoor practice, sprint karting, and club-level competition. What is the benefit of the rear bellow? The rear bellow improves ankle and Achilles mobility during braking and acceleration while helping the shoe maintain support around the heel. How should OMP KS-3 Kart Racing Shoes fit? The shoes should fit securely around the heel and midfoot without painful pressure points. Leave a small amount of space around the longest toe while wearing the socks normally used for karting. Are the OMP KS-3 shoes fire-resistant? No. These shoes are intended for kart racing and should not be used as a substitute for fire-resistant auto racing shoes where homologated footwear is required. How should the KS-3 shoes be cleaned? Clean the exterior with a soft brush or damp cloth and mild soap, then allow the shoes to air dry naturally. Do not machine wash, soak, or place them near direct heat. Lightweight Comfort for Building Karting Confidence The OMP KS-3 MY2026 Kart Racing Shoes provide beginner and developing drivers with breathable comfort, flexible support, and reliable pedal feel. Their forgiving suede construction, supportive reinforcements, and kart-specific outsole make them a dependable choice for learning, practicing, and competing with greater confidence.

Bell KC7-CMR Pro Lewis Hamilton 2026 Karting Helmet The Bell KC7-CMR Pro Lewis Hamilton 2026 Karting Helmet brings Formula 1-inspired design to serious youth karting. Created with Lewis Hamilton and Bell’s paint team, this special edition features a bold yellow and red design based on his own 2026 F1 helmet. Lightweight, highly ventilated, and packed with premium accessories, it is built for young drivers who want safety, comfort, and standout style on track. Lewis Hamilton Style Built on Bell KC7-CMR Based on Bell’s proven KC7-CMR platform, this helmet combines a hand-laminated carbon, Kevlar, and fiberglass shell with advanced airflow and youth karting certification. The ultra-lightweight design helps reduce fatigue for developing drivers, while the included aero and visor upgrades give this special edition a true race-ready package right out of the box. KC7-CMR Pro Lewis Hamilton 2026 Key Features Lewis Hamilton signature 2026 design with yellow and red graphics inspired by his Formula 1 helmet. Includes premium accessory package with 2mm multi-layer red clear visor, top and side air intakes, rear spoiler, and Bell helmet bag. Ultra-lightweight construction helps reduce neck fatigue during long karting sessions. Advanced ventilation system with 14 intake and exhaust channels helps keep the driver cool and focused. 2mm double-screen anti-fog visor provides clear visibility in changing conditions. Aerodynamic shell shape improves airflow, visor positioning, and stability at speed. Hand-laminated carbon, Kevlar, and fiberglass shell delivers strength while keeping overall weight low. Snell-FIA CMR-2016 approved for youth karting competition use. Helmet Weight Sizes 54–56 cm: 1185g, plus or minus 3% Sizes 57–59 cm: 1230g, plus or minus 3% KC7-CMR Pro Lewis Hamilton 2026 Karting Helmet FAQs Is the Bell KC7-CMR Pro Lewis Hamilton 2026 helmet approved for kart racing? Yes, it is Snell-FIA CMR-2016 approved for youth karting competition. Who is the Bell KC7-CMR Pro Lewis Hamilton helmet made for? It is designed for karting drivers under 18 who need a lightweight helmet built to youth karting standards. What accessories are included with this Lewis Hamilton edition? It includes a 2mm multi-layer red clear visor, top and side air intakes, rear spoiler, and Bell helmet bag. Is the visor anti-fog? Yes, the helmet includes a 2mm double-screen anti-fog visor designed to help maintain clear vision in wet or humid conditions. What makes this helmet different from the standard KC7-CMR? This version features the Lewis Hamilton 2026 design and comes with premium accessories already included. The Bell KC7-CMR Pro Lewis Hamilton 2026 Karting Helmet gives young racers a serious mix of Formula 1-inspired style, lightweight protection, and included race-ready upgrades. For drivers chasing confidence and performance on track, this helmet is ready for the next session. Bell KC7-CMR Pro Lewis Hamilton Sizing Chart 

AiM Sports MyChron6 Digital Data Logging Dash For Kart Racing Available now! The world's #1 racing go kart data logger just got even better. Get your hands on the latest innovation in karting data logging and analysis, the AiM MyChron6 Data Logger for racing go karts. The AiM MyChron6 is an advanced karting data logger, specifically designed for competitive kart racers looking to monitor, analyze, and enhance their performance. The MyChron6 features improved GPS technology (compared to MyChron 5) for precise lap timing. Its configurable display gives you real-time data logging that integrates seamlessly into AiM's famous Race Studio 3 software for data analysis and management. New In The AiM MyChron6 The MyChron6 now boasts an improved 20-hour battery life, doubling the 10-hour battery life of the MyChron 5. This allows for extended racing sessions without frequent recharges. Integrated Bluetooth for connection to smart watches to monitor heart and health vitals. Improved GPS accuracy with GPS09, further improving data collection The visual on-screen Delta Lap Timer function allows drivers to instantly view sector times and compare laps more effectively, helping refine racing lines and shave seconds off lap times. The MyChron6 features a larger screen measuring 150 x 79 x 36.6mm, compared to the MyChron 5’s 137 x 88 x 30mm display. This wider display allows for clearer data presentation and enables an exclusive on-screen delta bar animation, which provides real time graphical feedback comparing your current lap time to your best. The USB Type-C port ensures faster downloads and rapid charging, making data transfer between the device and your laptop, phone or tablet even more efficient. Introducing the MyChron6, a cutting-edge data logger engineered specifically for karting enthusiasts. Available now, this powerful device combines advanced sensor technology, rugged construction, and a user-friendly interface to give racers at every level the ultimate performance insights. Crystal-Clear Display & LED Alerts High-Resolution LCD: 320×136-pixel, 16-level grayscale display with 8 configurable RGB backlight colors for excellent visibility. Shift Lights & Alarm LEDs: Five customizable RGB shift lights plus two alert LEDs ensure you never miss critical information. Next-Generation Connectivity Wi-Fi & Bluetooth: Seamless data transfer, firmware updates, and configuration via wireless connection. Aux CAN Connection: Allows for easy integration of additional modules and sensors. USB Port: Convenient data download, mass storage support, and battery charging.Precision Timing & Track Mapping 25 Hz GPS: Highly accurate lap timing and real-time position tracking. Built-in track database recognizes circuits automatically. Digital Inputs/Outputs: Optical and magnetic lap signal inputs, plus one programmable output for high/low activation. Advanced Sensor Array Temperature Input: Monitor critical engine temperature for optimal tuning. Choose between cylinder head temperature (CHT), exhaust gas temperature (EGT), or water/coolant temperature. 6-Axis Inertial Platform: Captures acceleration and gyro data at 100 Hz for in-depth analysis of cornering, braking, and handling. Rugged, Expandable & Versatile External Module Support: Compatible with MyChron Expansion, IR Temperature Controller, SmartyCam 3 Series, and Lambda (LCU-One/LCU1S). 4 GB Onboard Memory: Ample storage for session logs and telemetry.Built to Last Rugged Body: PA6 GS30% composite construction for exceptional durability.IP67 Waterproof: Designed to withstand wet and dusty racing conditions. Compact & Lightweight: 150.0 × 79.0 × 36.6 mm, 370 g. Rechargeable Lithium Battery: Provides long-lasting power for extended track sessions.

Sparco K-Attack Kart Racing Gloves - Youth Sizes Pro-Grade Grip, Style, and FIA 8877-2022 Certified Protection Command every corner with confidence in the Sparco K-Attack Kart Racing Gloves, engineered for elite young kart racers who demand the highest levels of grip, comfort, and FIA-certified safety. Blending modern style with cutting-edge technology, these premium youth-size karting gloves are designed to deliver uncompromised control and durability under race conditions—whether you're a seasoned competitor or a rising talent on the karting circuit. The K-Attack gloves feature Sparco’s advanced HTX high-grip palm technology, offering unrivaled feel and feedback on the wheel. The gloves' breathable stretch-fit upper, external seams, and pre-curved fingers ensure all-day comfort and precision, while the aggressive styling matches the intensity of your performance. If you're looking to elevate your race gear with a kart glove that blends safety, grip, and design, the K-Attack is built for you. Sparco K-Attack Kart Racing Glove Features and Highlights HTX high-grip silicone palm zones for maximum control and wheel feel External seams and pre-curved fingers for reduced fatigue and race-day comfort Stretch-fit breathable upper for airflow and flexibility during long sessions Modern, aggressive design with bold color-ways and Sparco styling Sparco K-Attack Kart Racing Glove give kart racers the grip, response, and comfort they need to perform at their best. Built to handle the rigors of competition, they deliver control and style in every lap. Breakdown of the Sparco K-Attack’s standout attributes Pre-curved fingers: Minimizes material bunching while gripping the wheel, reducing pressure points and fatigue, giving you a more comfortable grip for extended races. External stitching: Enhances comfort by eliminating pressure on your fingers, allowing for a close and irritation-free fit. Silicone printed palm: Provides superior grip on the wheel, enhancing control and responsiveness during sharp turns and quick manoeuvres. Breathable lining: Keeps your hands cooler and drier by allowing airflow, reducing sweat build-up for a more confident grip. Elasticated cuff: Ensures a snug, non-slip fit around the wrist, maintaining glove position for consistent performance throughout the race. Experience the benefits of high-end features in every lap with the K-Attack Kart Gloves. Built for close, precise control, the gloves’ silicone print on the palm and fingers keeps your grip secure through every turn. The breathable lining ensures your hands stay cool and dry, maintaining comfort and control during extended sessions. With external seams and pre-curved fingers, you’ll find a fit that reduces fatigue and pressure, allowing you to focus fully on steering precision and handling. The Sparco K-Attack Gloves deliver exceptional value with a focus on essential karting features that make a difference in every race. Built for comfort, grip, and durability, they are designed to elevate your control and confidence on the track, giving you a professional edge at an accessible price. Sparco K-Attack Kart Racing Glove Size Chart Sparco K-Attack Kart Racing Glove FAQ's Q: What kind of grip do these gloves offer? A: They use HTX high-grip silicone technology across the palm and fingers to provide maximum traction and steering precision. Q: Are the seams internal or external? A: The K-Attack features external seams, reducing internal friction and enhancing long-wear comfort. Q: How breathable are these gloves? A: The stretch-fit fabric is lightweight and ventilated, helping to keep your hands cool during extended sessions or hot-weather races. Q: Are these gloves suitable for wet weather? A: Yes, the HTX palm design provides excellent grip in both dry and damp conditions, offering consistent control. Q: What sizes are available? A: The K-Attack gloves come in a wide range of youth sizes, with a size chart available to ensure the perfect fit. Q: How do they compare to Sparco K-Arrow+ gloves? A:K-Arrow+ are FIA 8877-2022 certified, the K-Attack are not, but the K-Attack features more aggressive styling and similar HTX grip tech, offering premium performance and design.

Alpinestars KMX-9 v3 Graphic 6 Kart Racing Suit Get ready to hit the track in style and safety with the Alpinestars KMX-9 v3 Graphic 6 Kart Racing Suit! Whether you're an entry-level racer or climbing up the ranks, this suit has everything you need to perform at your best—and look good doing it. Certified to FIA homologation standards, it delivers top-tier protection, comfort, and mobility, all wrapped in a design that's sleek and packed with performance-driven details. Built for Performance and Comfort Let’s face it, karting is serious business, and your suit should match that intensity. The KMX-9 v3 brings an advanced dual-layer construction that offers lightweight protection without compromising on comfort. Inside, the 100% polyester toweling liner keeps you cool and dry, ensuring you can focus on the race without worrying about heat or discomfort. Driver-Friendly Design It’s not just about looking the part—it’s about feeling unstoppable. This suit features strategically placed stretch panels on the back, shoulders, and waist, giving you the freedom to move without material bunching up. And let's not forget the breathable mesh panels on the crotch and underarms, because airflow is key when you're tearing up the track. Durability Meets Style Durable and designed to last, the KMX-9 v3 is engineered to withstand the rigors of kart racing. The suit’s Formula 1-inspired epaulette design not only adds a touch of race-day flair, but its tough construction also ensures you’re always race-ready. KMX-9 v3 Graphic 6 Key Features Certified to FIA 8877-2022 Grade 1 homologation standards, making it race-legal and trusted by pros. Dual-layer construction for lightweight protection and breathability. 100% polyester toweling liner for moisture-wicking comfort during those heated moments on the track. Knitted stretch panels on the back, shoulders, and lumbar area to minimize resistance while driving. Tech mesh panels under the arms and in the crotch area to boost airflow. Anatomically designed arms, legs, and torso for an optimized driving position. Premium YKK metal zipper with personalized pullers and a double slider for a customizable fit. Knitted wrist and ankle cuffs for added comfort and reduced weight. Adjustable waist belt for a snug, personalized fit. Two thigh pockets for convenient storage—because who doesn’t like a little extra space? Why Choose the Alpinestars KMX-9 v3 Graphic 6 Suit? When you're out on the track, it's not just about speed—it's about control, comfort, and confidence. The KMX-9 v3 lets you focus on your performance, knowing your suit has got your back (and arms, legs, and everything else). The combination of cutting-edge design and smart features like stretch panels and breathable mesh keeps you moving freely while keeping cool under pressure. Plus, it’s built to last, so this suit will be with you from your first race to your victory lap. Alpinestars KMX-9 v3 Graphic FAQs Is the KMX-9 v3 Graphic 6 FIA certified? Yes, the KMX-9 v3 is certified to the latest FIA 8877-2022 Grade 1 homologation standard, so you can rest easy knowing you meet the legal requirements for racing. Is the Alpinestars KMX-9 v3 suit comfortable for long races? Absolutely! With its moisture-wicking polyester liner and breathable mesh panels, this suit is designed for comfort during extended track sessions. What sizes are available for the Alpinestars KMX-9 v3 suit? The KMX-9 v3 comes in a wide range of sizes to ensure a perfect fit for all racers, from EU40-EU60. How does the Alpinestars KMX-9 v3 suit improve performance? The knitted stretch panels in key areas—like the back, shoulders, and waist—minimize material resistance, allowing you to move freely and react quickly during races. Don’t wait—gear up and grab the Alpinestars KMX-9 v3 Graphic 6 Kart Racing Suit today! You’ll be stepping into the next level of racing performance and comfort. Order now and get ready to take the checkered flag in style!

Sparco K-Rock Kart Racing Shoes The Sparco K-Rock Kart Racing Shoes combine rugged durability, breathable comfort, and responsive pedal control for demanding indoor and outdoor kart racing. Built for drivers who need dependable support through practice, qualifying, and race-day competition, the K-Rock delivers a secure fit without sacrificing flexibility or pedal sensitivity. A durable microfiber leather and 3D mesh upper provides support in high-wear areas while allowing air to circulate around the foot. Reinforced toe, side, and heel sections improve abrasion resistance, while the elasticated rear bellow allows the ankle to move naturally during braking and acceleration. The anatomically shaped insole and shock-absorbing footbed help reduce vibration and foot fatigue during long sessions. A high-grip rubber outsole maintains a close connection with the pedals, giving the driver precise feedback and dependable control lap after lap. Durable Microfiber Leather Upper The K-Rock uses a strong microfiber leather upper designed to withstand regular karting use. The supportive construction helps protect the foot while maintaining the flexibility required for accurate pedal operation. Breathable 3D Mesh Panels Strategically positioned 3D mesh panels improve airflow through the shoe, helping reduce heat and perspiration during long races, warm-weather events, and high-intensity indoor karting sessions. Antibacterial Inner Lining An antibacterial inner lining helps control odor and maintain a fresher interior during repeated use. This is especially useful for drivers competing in multiple sessions throughout a race weekend. Reinforced Heel Support The reinforced heel section provides additional stability during braking and rapid pedal transitions. Its durable construction helps limit unwanted heel movement while protecting a commonly worn area of the shoe. Abrasion-Resistant Toe and Side Protection Protective reinforcement around the toe and outer side helps resist wear caused by contact with pedals, chassis components, and trackside surfaces. Elasticated Rear Heel Bellow A flexible rear bellow allows the Achilles and ankle area to move naturally while driving. This improves mobility and helps reduce pressure during repeated throttle and brake operation. Anatomical Shock-Absorbing Footbed The anatomically shaped insole supports the foot while the shock-absorbing footbed helps isolate vibration transferred through the kart chassis and pedals. This can improve comfort and reduce fatigue during extended sessions. High-Grip Karting Outsole The specialized rubber outsole provides dependable grip and responsive pedal feedback. Its low-profile construction helps the driver feel subtle changes in brake pressure and throttle position for more consistent control. Secure Lace and Ankle-Strap Closure A traditional lace system allows the fit to be adjusted across the foot, while the upper hook-and-loop strap adds ankle support and helps keep the closure securely positioned. Sparco K-Rock Kart Racing Shoe Features Designed for indoor and outdoor kart racing Durable microfiber leather construction Breathable 3D mesh upper panels Antibacterial interior lining Reinforced heel support Abrasion-resistant side protection Reinforced toe area Elasticated rear heel bellow Anatomically shaped insole Shock-absorbing footbed High-grip rubber karting sole Responsive brake and throttle pedal feel Traditional lace closure Upper hook-and-loop ankle strap Suitable for developing, club-level, and experienced drivers Technical Specifications Product: Sparco K-Rock Kart Racing Shoes Manufacturer: Sparco Product Type: Kart racing shoes Upper: Microfiber leather with breathable 3D mesh Lining: Antibacterial interior lining Closure: Lace-up system with hook-and-loop ankle strap Rear Construction: Elasticated heel bellow Footbed: Anatomical shock-absorbing insole Outsole: High-grip rubber karting sole Protection: Reinforced heel with abrasion-resistant toe and side panels Recommended Use: Indoor and outdoor kart racing Sparco K-Rock Kart Racing Shoe Size Chart Frequently Asked Questions What sizes are available in the Sparco K-Rock? The Sparco K-Rock is generally available in European sizing. Available sizes may vary by color and current inventory, so refer to the product size selector and Sparco shoe size chart. Are the Sparco K-Rock Kart Racing Shoes fireproof? No. The K-Rock is designed for kart racing and should not be used as a substitute for fire-resistant auto racing footwear. Drivers competing in automobile events should use shoes approved to the standard required by their sanctioning organization. Can the Sparco K-Rock be used for indoor karting? Yes. Its breathable upper, supportive construction, and high-grip outsole make the K-Rock suitable for indoor leagues, practice sessions, and competitive indoor kart racing. Can the K-Rock be used for outdoor kart racing? Yes. The durable upper, reinforced protection, and responsive sole make it suitable for outdoor practice and competition. Are the Sparco K-Rock shoes breathable? Yes. The upper combines microfiber leather with 3D mesh panels to improve airflow and help reduce heat buildup. What does the antibacterial lining do? The antibacterial lining helps limit odor and maintain a fresher interior during repeated use and long racing weekends. Do the K-Rock shoes provide good pedal feel? Yes. The high-grip rubber outsole is designed to provide direct feedback through the brake and throttle pedals while maintaining dependable traction. What is the benefit of the elasticated rear heel bellow? The rear bellow allows the ankle and Achilles area to flex naturally during braking and acceleration while maintaining heel support. How does the shock-absorbing footbed help? The footbed helps reduce vibration transferred through the kart chassis and pedals, improving comfort and limiting foot fatigue during long sessions. How should Sparco K-Rock Kart Racing Shoes fit? Karting shoes should fit securely around the heel and midfoot without painful pressure points. Leave a small amount of space around the longest toe while wearing the socks normally used for racing. Are the Sparco K-Rock shoes suitable for beginners? Yes. Their balance of support, durability, ventilation, and responsive pedal feel makes them suitable for developing drivers as well as experienced competitors. How should the Sparco K-Rock shoes be cleaned? Clean the exterior with a soft damp cloth and mild soap, then allow the shoes to air dry naturally. Do not machine wash, fully submerge, or place them near direct heat. Durable Support and Responsive Karting Control The Sparco K-Rock Kart Racing Shoes combine breathable materials, reinforced protection, flexible ankle movement, shock-absorbing comfort, and a high-grip outsole. Their rugged yet responsive construction makes them a dependable choice for kart racers seeking long-lasting support and precise pedal control.

Stilo ST6 CMR Carbon Lite Karting Youth Helmet The Stilo ST6 CMR Carbon Lite is purpose-built for young kart racers who demand professional-grade performance, safety, and comfort. Developed using the same engineering philosophy found in Stilo’s Formula 1 helmet program, the ST6 CMR Carbon Lite delivers elite protection in an ultra-lightweight package designed specifically for youth competition. Featuring an advanced composite shell reinforced with an outer carbon layer, this helmet offers exceptional impact resistance while keeping total weight under 2.2lbs. Reducing helmet mass is critical for young drivers, helping minimize neck fatigue and maintain focus during long race days, practice sessions, and multi-heat events. The ST6 platform introduces a noticeably wider eyeport, improving peripheral vision and situational awareness when battling in traffic, defending position, or attacking tight apexes. Combined with a refined internal ventilation system fed by large front and top air intakes, the ST6 CMR Carbon Lite keeps drivers cooler and more comfortable as track temperatures rise. Designed exclusively for youth karting categories, the helmet’s newly shaped shell and re-engineered interior padding provide a secure, stable fit tailored to younger drivers. A durable, smooth-operating visor system enhances reliability while maintaining precise visor control. The ST6 CMR Carbon Lite delivers race-ready style straight out of the box. Fully FIA CMR-2016 homologated, the Stilo ST6 CMR Carbon Lite meets the strict safety requirements mandated for youth kart racing worldwide, making it an ideal choice for competitive junior drivers stepping up their performance. Carbon Lite Helmet Features FIA CMR-2016 homologated for youth kart racing Ultra-lightweight design under 2.2lbs to reduce neck strain Advanced composite shell with carbon outer layer for exceptional impact protection Wide eyeport for enhanced peripheral vision and on-track awareness Optimized ventilation with large front and top air intakes Youth-specific shell shape and interior padding for comfort and stability Durable, smooth-action visor mechanism Stilo helmets are worn by winning drivers worldwide, including well known F1 Mercedes driver Valterri Bottas, Monster Energy NASCAR Cup Series Champions Martin Truex, Jimmie Johnson and Kyle Busch, IndyCar Series Champion Tony Kanaan and WRC Champion Sébastien Loeb. Stil ST6 Sizing Guide Frequently Asked Questions FAQs Is the Stilo ST6 CMR Carbon Lite helmet CMR-2016 approved? Yes, the Stilo ST6 CMR Carbon Lite is fully homologated to the FIA CMR-2016 standard, making it legal and safe for use in all youth karting competitions that require CMR certification. What is the weight of the ST6 CMR Carbon Lite helmet? This helmet weighs under 2.2LBS, making it one of the lightest youth karting helmets available. Its ultra-lightweight design helps reduce neck strain during long sessions or high-G impacts. What makes this helmet suitable for young drivers? The ST6 CMR Carbon Lite is designed specifically for youth racers, with a smaller shell size, youth-specific fitment, and lightweight carbon composite construction for comfort, stability, and protection tailored to younger drivers. Does the helmet provide good airflow and cooling? Yes. The ST6 CMR Carbon Lite includes large front and top vents that feed into an internal ventilation system, ensuring consistent airflow to keep drivers cool and focused even in hot conditions. Can this helmet be used in competitive karting events? Absolutely. The ST6 CMR Carbon Lite is CMR-2016 certified, which is required for most national and international youth karting competitions. Is Stilo a good brand for kart racing helmets?Yes—Stilo kart racing helmets are highly regarded in the motorsports world for their innovation, safety, and Italian craftsmanship. The Stilo ST6 CMR Carbon Lite Karting Helmet is specifically designed for younger drivers and offers professional-grade features in a lightweight, competition-ready design. Whether you're just entering the sport or competing at the national level, Stilo delivers championship-level protection and comfort. Where are Stilo kart helmets made?Stilo helmets, including the ST6 CMR Carbon Lite, are engineered and manufactured in Italy. Every helmet undergoes rigorous design, development, and testing to meet exacting safety standards. The result is a high-performance karting helmet trusted by racers across the globe. Do Stilo kart racing helmets run true to size?Yes, Stilo helmets generally run true to size. To find the best fit, measure the circumference of the driver’s head just above the eyebrows and refer to Stilo’s official sizing chart. The ST6 CMR Carbon Lite is offered in various sizes from 53cm to 59cm to accommodate junior drivers, making it one of the best karting helmets for kids and young adults looking for professional protection. What professional kart racers use Stilo helmets?Stilo is the helmet of choice for many top drivers in FIA Karting, WSK, and other international series. The Stilo ST6 CMR Carbon Lite shares the same aerodynamic shell shape as the adult ST6 models, making it a favorite for rising talents who want a lightweight kart helmet with advanced visibility and airflow similar to what the pros use. Is the Stilo ST6 CMR suitable for all ages?The ST6 CMR Carbon Lite is designed for young drivers under 15, as required by FIA regulations. Its lightweight shell and smaller sizing options make it ideal for youth racers needing superior protection, comfort, and performance during competitive karting events. Where can I buy authentic Stilo ST5 CMR Carbon Lite Karting Helmets?Right here at Competition Karting. As an authorized Stilo dealer, we carry the full lineup of Stilo kart racing helmets, including the youth-specific ST6 CMR Carbon Lite. Enjoy fast shipping, expert support, and trusted service from a team that knows motorsports from the inside out. Kart Racing Helmet – Frequently Asked Questions (FAQ) Remember that safety is paramount in kart racing, and choosing the right helmet and maintaining it properly is essential for your protection on the track. Consult the professionals at Competition Karting any time you have specific questions about your racing helmet. What is the best helmet for kart racing? The Stilo ST6 CMR Carbon Lite kart helmet is widely considered one of the best youth karting helmets, offering premium features for serious kart racers. Why do I need a racing helmet?Auto and kart racing helmets are essential for protecting your head in high-speed accidents. They also shield against debris and, in some motorsports, fire—making them a non-negotiable safety requirement. How do I choose the right size Kart Racing helmet?Use a flexible tape to measure the circumference of your head just above your eyebrows and ears. Compare the measurement to the size chart. For more help, read our blog on how to fit your helmet properly at Competition Karting. What safety standards should I look for in a youth kart racing helmet? Look for the FIA CMR-2106 certification for karting. Can I use a motorcycle helmet for kart racing?No. Motorcycle helmets lack the kart-specific certifications and features like proper ventilation and impact resistance optimized for karting. Always use a helmet rated for motorsport competition. How often should I replace my kart racing helmet?Replace your helmet every few years depending on usage and the manufacturer's guidance. If it’s been dropped, involved in an impact, or shows signs of wear, replace it immediately. Are expensive racing helmets safer than budget ones?Yes, typically. While both must meet minimum safety standards, premium helmets offer lighter materials, better fit, improved aerodynamics, and enhanced comfort, all of which impact race performance and fatigue. How do I maintain and clean my kart racing helmet?Clean the exterior and interior using a helmet-specific care product like the Molecule Helmet Care Kit. Avoid submerging the helmet or using abrasive cleaners. Visors should be cleaned gently to avoid scratching. Do I need to wear a balaclava under my kart racing helmet?While not required for all karting events, a balaclava enhances comfort, keeps your helmet liner clean, and helps wick sweat. Fire-rated balaclavas are mandatory in sanctioned auto racing and recommended for high-performance karting. Can I wear glasses with my kart racing helmet?Yes. Wide eye ports, make it compatible with most prescription glasses and racing eyewear. A good fit ensures the glasses remain stable and fog-free. Are carbon fiber helmets better?Carbon fiber helmets are lighter and stronger, reducing fatigue during long races while offering excellent impact protection. They are a top choice for competitive drivers. Can I use a used helmet for racing?It’s not recommended. Damage or degradation may not be visible, and older helmets might not meet current safety standards. Always buy new from an authorized dealer like Competition Karting. What's the importance of proper helmet ventilation?Good ventilation helps manage heat and moisture inside the helmet, reducing fatigue and keeping you focused throughout your race. How do I store my kart racing helmet between races?Store your helmet in a cool, dry place away from direct sunlight. Use a padded helmet bag like our Competition Karting Evo Helmet Bag to prevent damage during transport or storage. What is the difference between Snell K2020 and CMR2016 certifications? Snell K2020 is designed for adult karting helmets, focusing on impact protection. CMR2016 is tailored for drivers under 15, offering a lighter helmet to reduce neck strain while maintaining safety standards. Are tear-off visors necessary for kart racing? Tear-off visors are beneficial in maintaining clear vision during races by allowing drivers to remove a dirty visor layer quickly. They are especially useful in outdoor karting where debris and dirt are common. How do I know if my helmet is still safe to use? Helmets should be inspected regularly for signs of wear or damage. If a helmet has been involved in a significant impact or shows signs of degradation, it should be replaced immediately. Additionally, helmets should be replaced every 5 years, even if no damage is visible. Can I customize my kart racing helmet? Yes, many manufacturers offer customization options for fit and aesthetics. However, any modifications should not compromise the helmet's structural integrity or safety certifications.

Stilo Carbon Curva Rib Protector Ultra-Light Rib Protection for Kart Racers Stilo has developed their patented-technology Kart ‘Carbon Curva’ Rib Protector for the serious kart racer. Unlike other protectors on the market, this protector incorporates a patented fusion of protective carbon and flexible carbon to form a more comfortable, form-fitting solution while offering superior protection. A great fit results in less movement within the protector, increasing both comfort and protection. Made with an ultra-lightweight carbon construction, the Carbon Curva is vailable in Small, Medium and Large sizes. Engineered with a true carbon fiber outer shell and internal energy-absorbing foam, the Stilo Carbon Curva kart rib protector maximizes safety while minimizing bulk. Its contoured, ergonomic shape hugs the body naturally, providing a locked-in feel without restricting upper-body mobility. With an adjustable strap system and multiple size options for youth and adult drivers, the Curva sets the benchmark for modern karting protection. Stilo Carbon Curva Rib Protector Highlights FIA 8870-2018 homologated for karting competition worldwide Real carbon fiber shell for ultra-lightweight, high-impact protection Anatomically curved design for superior fit and movement Adjustable shoulder and torso straps for personalized comfort Available in youth and adult sizing for optimal protection across all age groups Stilo Carbon Curva Rib Protector Size Chart FAQ – Stilo Carbon Curva Rib Protector Q: What materials is the Carbon Curva made from?A: It features a full carbon fiber outer shell and energy-absorbing foam lining for optimal protection and weight reduction. Q: Who should use the Stilo Carbon Curva?A: It’s ideal for both professional and amateur kart racers looking for lightweight, certified rib protection with exceptional comfort. Q: Is it suitable for younger drivers?A: Yes. The Carbon Curva comes in youth and adult sizes, allowing proper fitment for a wide range of drivers. Q: How is the fit adjusted?A: The rib protector includes fully adjustable shoulder and waist straps for a secure and custom fit during racing. Q: Will it fit under a standard karting suit?A: Absolutely. The low-profile design fits comfortably under most modern CIK/FIA-approved suits. Q: How does the Carbon Curva compare to other 8870 rib protectors?A: The Stilo Carbon Curva stands out with its true carbon construction, ultra-lightweight feel, and contoured ergonomic fit designed for high-performance racing.

OMP KS-3 Kart Racing Suit CIK-FIA Level 2 Certified, Lightweight, and Race-Ready Constructed from lightweight, abrasion-resistant materials, the KS-3 features strategically placed mesh inserts for enhanced breathability, along with elastic stretch panels that offer unrestricted movement. Its pre-curved arms, floating sleeves, and modern cut make it one of the best karting suits for drivers seeking comfort without compromising protection. Whether you’re just starting in karting or refining your skills for higher levels of competition, this lightweight kart suit delivers race-day performance with all-day comfort. As one of the most recognized brands in motorsports, OMP is synonymous with quality, innovation, and Italian craftsmanship. The OMP KS-3 suit for karting is proof that you don’t have to sacrifice performance for value. Available now at Competition Karting, your premier destination for FIA kart suits, fast shipping, and expert gear advice. OMP KS-3 features high performance design at a competitive price. Constructed with a full Cordura outer layer, the KS-3 is homologated as a CIK-FIA Level 2 suit. The inner lining is composed of a soft, sweat wicking cotton material that is provides maximum breathability. Mesh inserts are built into the thighs, shoulders and pockets to further help with driver cooling. Pre-curved sleeves are attached with a fully-floating system for movement precision, while a low-cut collar is maximizes comfort in a seated karting position. OMP KS-3 Kart Racing Suit FAQs What is the difference between a kart suit and an auto racing suit?A kart racing suit like the OMP KS-3 is designed specifically for kart racing, is designed for abrasion protection and does not include fire-retardant materials, as fire risk in karting is minimal. In contrast, auto racing suits (used in car racing) are built with fire-retardant fabrics and carry FIA or SFI flame-resistance certifications for protection in automotive race environments. Where are OMP suits made?OMP racing products, including the OMP KS-3 kart suit, are designed and manufactured in Italy. OMP’s facility in Genoa is known for its high standards of craftsmanship and attention to detail, producing race wear trusted by drivers worldwide. What is the OMP KS-3 kart racing suit made of?The KS-3 features a three-layer construction with abrasion-resistant outer materials and breathable inserts for enhanced comfort and performance. It’s built to reduce heat and maximize flexibility during racing. Is the OMP KS-3 FIA certified?Yes. The KS-3 is homologated to the CIK-FIA LEVEL 2 kart suit standard, making it legal for use in all FIA-sanctioned karting events and many national series worldwide. Is this a lightweight kart suit?Absolutely. The KS-3 is designed to be a lightweight kart suit, offering freedom of movement and cooling airflow without sacrificing safety. Who is the OMP KS-3 ideal for?This suit is ideal for competitive kart racers of all levels—junior, senior, and master classes. It’s engineered to serve both amateur and professional drivers looking for style, performance, and compliance with the latest FIA kart suit regulations. Why choose OMP for karting gear?OMP kart racing suits are known for their innovative design, Italian craftsmanship, and race-proven reliability. The KS-3 continues that tradition with a fresh, artistic edge. Where can I buy the OMP KS-3 kart suit?Right here at Competition Karting. We offer fast shipping, expert sizing support, and only authentic, FIA-approved race wear from trusted brands like OMP.

Alpinestars KMX-9 v2 Graphic 3 Kart Racing Suit Certified to CIK-FIA Level 2 homologation standards, the KMX-9 v2 features an aggressive design and vibrant colorways for entry- and intermediate-level racers. Boasting two-layer construction for protection and low weight, this suit also has a 100% polyester toweling liner for driver comfort. Other driver-friendly design details include an angled front opening, stretch panels on the back, shoulders and waist for an optimized fit, and breathable mesh material on the crotch and underarms. Alpinestars KMX-9 v2 Graphic 3 Kart Racing Suit Protection Certified to CIK-FIA Level 2 homologation standard N 2013-1. Technical two-layer construction that meets the new homologation standard, featuring a Twill polyamide outer shell, plus double technical linings for comfort and fit. Engineered for durability, minimal material bunching and high levels of abrasion resistance while the poly-toweling lining offers moisture-wicking properties. Alpinestars KMX-9 v2 Graphic 3 Kart Racing Suit Construction Advanced two-layer construction assembly for optimized performance, improved breathability and weight saving. Alpinestars asymmetric front opening design aids fitting. Tech mesh panels positioned on the underarms and seat area for optimized ventilation. Alpinestars Formula 1-derived design and technology shoulder epaulettes. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort with safe closure system. Adjustable waist belt allows a tight personalized fit. Knitted stretchable panels on back shoulder and lumbar area ensure minimal material resistance while driving. Engineered for durability, minimal material bunching and abrasion resistance, while the poly-toweling lining boasts moisture-wicking properties. Alpinestars KMX-9 v2 Graphic 3 Kart Racing Suit Features Anatomical arm, leg and torso paneling is patterned to create the optimum position while driving. Knitted wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Two thigh pockets offer a convenient storage option for those times away from the driving seat. Premium YKK zipper with personalized zipper pullers, plus double slider for versatile and customizable fit. Comes in two amazing Graphic 3 colorways.   Alpinestars KMX-9 v2 Graphic 3 Kart Racing Suit Size Chart

Alpinestars KMX-9 v2 Graphic 4 Kart Racing Suit FIA 2025 Expiry Certified to CIK-FIA Level 2 homologation standards, the KMX-9 v2 features an aggressive design and vibrant colorway for entry- and intermediate-level kart racers. Boasting two-layer construction for protection and low weight, this suit also has a 100% polyester toweling liner for driver comfort. Other driver-friendly design details include an angled front opening; stretch panels on the back, shoulders and waist for an optimized fit; and breathable mesh material on the crotch and underarms. Alpinestars KMX-9 v2 Graphic 4 Kart Racing Suit Protection Certified to CIK-FIA Level 2 homologation standard N 2013-1. Technical two-layer construction that meets the new homologation standard, featuring a twill polyamide outer shell, plus double technical linings for comfort and fit. Engineered for durability, minimal material bunching and high levels of abrasion resistance while the poly-toweling lining offers moisture-wicking properties. Alpinestars KMX-9 v2 Graphic 4 Kart Racing Suit Construction Advanced two-layer construction assembly for optimized performance, improved breathability and weight saving. Alpinestars asymmetric front opening design aids fitting. Tech mesh panels positioned on the underarms and seat area for optimized ventilation. Alpinestars Formula 1-derived design and technology shoulder epaulettes. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort with safe closure system. Adjustable waist belt allows a tight personalized fit. Knitted stretchable panels on back shoulder and lumbar area ensure minimal material resistance while driving. Engineered for durability, minimal material bunching and abrasion resistance, while the poly-toweling lining boasts moisture-wicking properties. Alpinestars KMX-9 v2 Graphic 4 Kart Racing Suit Key Features Anatomical arm, leg and torso paneling is patterned to create the optimum position while driving. Knitted wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Two thigh pockets offer a convenient storage option for those times away from the driving seat. Premium YKK zippers with personalized zipper pullers, plus double slider for versatile and customizable fit. Alpinestars KMX-9 v2 Graphic 4 Kart Racing Suit Size Chart

Alpinestars Tech-1 KX v2 Karting Shoes Alpinestars Tech-1 KX v2 Karting Shoes Construction and Features Advanced seamless thermo-welded construction consists of ultra-thin PU film and 3D mesh to provide supremely lightweight performance and excellent comfort and fit. Sleek shoe profile conforms to the anatomy of the foot and ensures great fit and performance. Laser-cut air-intakes and perforations on upper, with 3D mesh on tongue offer excellent breathability and comfort. External heel, ankle and internal toe reinforcements for abrasion resistance and protection. Dual asymmetric closure system incorporates adjustable hook-and-loop ultra-thin strap plus aramidic speed top lacing with Alpinestars’ exclusive wire closure system. The system strategically envelopes the foot for optimal support and offers precise fit and secure closure. New superlight tongue construction combining micro suede and 3D mesh, provides excellent breathability and superior comfort. Collar padding constructed from PU foam for comfort and weight-savings. Soft microfiber collar is cut lower at the rear to give greater Achilles’ heel comfort and improved range of movement. Lightweight, one-piece heel and insole construction for enhanced heel lockdown and comfort whilst driving. Alpinestars exclusive thin rubber compound outsole, derived from Formula 1’s Race Program, delivers unsurpassed levels of feel and sensitivity with the pedals, while the textured pattern ensures optimum levels of grip. Alpinestars Tech-1 KX v2 Karting Shoe Size Chart Alpinestars Tech-1 KX v2 Karting Shoes FAQ's What size range is available for the Alpinestars Tech-1 KX v2? The Tech-1 KX v2 karting shoes are offered in European sizes 36 to 48. For optimal comfort and performance fit, we strongly recommend referring to the official Alpinestars sizing chart before purchasing. Are the Tech-1 KX v2 shoes suitable for indoor karting? Yes. Thanks to their lightweight construction, breathable mesh zones, and grippy rubber sole, the Tech-1 KX v2 is equally at home on indoor kart tracks as well as outdoor circuits. Are Alpinestars karting shoes fireproof? No. CIK-FIA karting regulations do not require fire-resistant footwear, so the Tech-1 KX v2 is not fireproof. For FIA-sanctioned auto racing, you’ll need fire-rated racing shoes instead. Do karting shoes like the Tech-1 KX v2 improve driving performance? Absolutely. With features like enhanced pedal feel, a contoured footbed, and advanced grip sole, the Tech-1 KX v2 is built to improve throttle control, braking modulation, and driver endurance during intense karting sessions. How should the Tech-1 KX v2 karting shoes fit? These shoes are designed to fit snugly and securely with minimal internal movement. A tight, form-fitting design ensures maximum pedal feedback and driving precision, especially during long stints on track. Do the Tech-1 KX v2 shoes stretch or break in over time? They may soften slightly with use, but won’t stretch significantly. It's best to choose a snug size from the start to maintain performance integrity. What’s the best way to clean my Tech-1 KX v2 shoes? Use a soft cloth with mild soap and water to spot-clean the exterior. Avoid full submersion or machine washing, as this may damage the materials and compromise durability. What socks work best with the Tech-1 KX v2? We recommend thin, moisture-wicking racing socks to optimize fit, reduce friction, and keep your feet cool and dry during high-performance karting sessions. How does the Tech-1 KX v2 compare to other Alpinestars karting shoes?The Tech-1 KX v2 is a premium karting shoe, offering upgraded materials, refined fit, and enhanced pedal feel over entry-level models like the Tech-1K Start V2. It’s the go-to choice for serious kart racers and advanced drivers who demand top-tier performance and comfort.

Sparco K-Skid Kart Racing Shoes Garage Sale Item: Availability is limited and may vary by size and color. Please review the selected option carefully before ordering. The Sparco K-Skid Kart Racing Shoes are engineered for competitive kart racers who want lightweight construction, secure support, and precise pedal feedback. Designed for demanding indoor and outdoor karting, the K-Skid combines a perforated leather upper, breathable 3D mesh, and an ultra-slim rubber outsole for confident control through every lap. The supportive mid-boot design helps stabilize the foot during braking and rapid pedal transitions, while the offset closure system creates a secure, performance-focused fit. Cushioned heel support and an ergonomic insole improve comfort during long practice sessions, qualifying runs, and race events. Premium Karting Performance The Sparco K-Skid is built for drivers who want a close connection with the brake and throttle pedals. Its lightweight materials reduce unnecessary bulk around the foot, while the thin outsole improves sensitivity and responsiveness. The structured upper provides support under braking and cornering loads without restricting the natural ankle movement required for smooth pedal operation. Perforated Leather and 3D Mesh Upper The upper combines soft perforated leather with breathable 3D mesh to improve airflow while maintaining support. This construction helps reduce heat buildup and perspiration during long races and warm-weather events. The soft leather also conforms comfortably around the foot while preserving the structure needed for competitive karting. Offset Performance Closure The K-Skid uses an asymmetrical offset closure system that follows the natural shape of the foot. This design helps reduce pressure across high-flex areas and provides a secure, locked-in fit. Internal reinforcement supports the closure and helps keep the foot stable during aggressive braking and quick pedal transitions. Textured Lateral Protection Textured leather reinforcement along the side of the shoe improves abrasion resistance in an area commonly exposed to pedals, chassis components, and repeated contact inside the kart. Cushioned Heel Support A supportive heel cup helps stabilize the rear of the foot while absorbing vibration and impact. This added cushioning can reduce fatigue during extended practice sessions and multi-heat race events. Ergonomic Cushioned Insole The pre-formed insole supports the natural shape of the foot and distributes pressure more evenly. Its cushioned construction improves comfort without reducing pedal sensitivity. Ultra-Slim Karting Outsole The lightweight outer sole is designed to provide a direct connection with the pedals. Its low-profile construction helps drivers feel subtle changes in brake pressure and throttle position for smoother and more consistent control. Anti-Static Rubber Sole The pure rubber outsole features an anti-static construction and a specialized textured tread for dependable traction. The molded sole provides grip during pedal operation and while moving around the paddock. Sparco K-Skid Kart Racing Shoe Features Garage sale item with limited availability Designed for competitive indoor and outdoor kart racing Ultra-lightweight mid-boot construction Soft perforated leather upper Breathable 3D mesh panels Asymmetrical offset closure system Internal closure reinforcement Textured leather lateral protection Cushioned heel support Pre-formed ergonomic insole Comfortable cushioned footbed Ultra-slim lightweight outer sole Specialized karting tread Anti-static pure rubber outsole Responsive brake and throttle pedal feel Suitable for practice, club racing, and high-level competition Technical Specifications Product: Sparco K-Skid Kart Racing Shoes Manufacturer: Sparco Product Type: Kart racing shoes Sale Type: Garage sale Upper: Perforated leather with breathable 3D mesh Closure: Asymmetrical offset lace system Protection: Textured lateral reinforcement Heel: Cushioned heel support Insole: Pre-formed ergonomic cushioned insole Outsole: Ultra-slim anti-static rubber sole Tread: Textured high-grip karting pattern Recommended Use: Indoor karting, outdoor karting, practice, and competition Sparco K-Skid Kart Racing Shoe Size Chart Frequently Asked Questions Is the Sparco K-Skid a garage sale item? Yes. This listing is part of the Competition Karting garage sale, so available sizes and colors may be limited. What sizes are available for the Sparco K-Skid? The K-Skid was generally produced in European sizing. Current availability is limited to the sizes shown in the product selector. Can the Sparco K-Skid be used for indoor karting? Yes. Its breathable upper, lightweight construction, and responsive sole make it well suited for indoor practice, leagues, and competition. Can the K-Skid be used for outdoor kart racing? Yes. The supportive upper, abrasion-resistant protection, and high-grip outsole make it suitable for outdoor karting. Are Sparco K-Skid shoes fire-resistant? No. The K-Skid is designed for kart racing and should not be used as a substitute for fire-resistant auto racing footwear where homologated shoes are required. What makes karting shoes different from regular athletic shoes? Karting shoes use thinner, more responsive soles for pedal sensitivity and include supportive construction designed for repeated braking, throttle movement, and lateral loads. Do the K-Skid shoes provide good pedal feel? Yes. The ultra-slim rubber outsole is designed to provide direct brake and throttle feedback while maintaining dependable grip. What is the benefit of the offset closure system? The offset closure follows the shape of the foot and helps reduce pressure across high-flex areas while providing a secure fit. How should Sparco K-Skid Kart Racing Shoes fit? They should fit securely around the heel and midfoot without painful pressure points. Leave a small amount of room around the longest toe while wearing normal karting socks. Do karting shoes stretch over time? The leather may soften slightly with use, but the shoes should not be expected to stretch significantly. Select a secure size without excessive tightness. What socks work best with the K-Skid? Thin, moisture-wicking socks generally provide the best balance of comfort, airflow, and precise fit. How should the Sparco K-Skid shoes be cleaned? Clean the exterior with a soft brush or damp cloth and mild soap. Allow the shoes to air dry naturally and avoid machine washing, soaking, or direct heat. How does the K-Skid compare with other Sparco karting shoes? The K-Skid emphasizes premium materials, lightweight construction, high breathability, and a close performance fit. Specifications may vary compared with newer Sparco karting shoe models. Lightweight Control for Competitive Kart Racing The Sparco K-Skid Kart Racing Shoes combine breathable leather, supportive reinforcement, cushioned comfort, and an ultra-slim high-grip outsole. Their lightweight design and responsive pedal feel make them a strong option for serious kart racers seeking dependable performance from practice through race day.

Sparco Tide-K Kart Racing Gloves Sparco Tide-K Kart Racing Gloves – Ultimate Grip, Comfort & Style for Serious Racers Designed for drivers who demand precision and performance, the Sparco Tide-K Kart Racing Glove sets the standard for high-end karting gloves. Whether you're a competitive club racer or a championship contender, the Tide-K gives you superior grip, optimal comfort, and bold Sparco styling that stands out on the track. This is not just a kart glove—it's a professional-grade tool engineered to enhance your connection with the kart and elevate your racing experience. The Tide-K features Sparco’s innovative HTX 3D grip technology, strategically placed silicone textures across the palm and fingers for unmatched control and feel. Pre-curved construction reduces hand fatigue, while external seams and breathable materials keep your hands cool and blister-free during long stints. Fully CIK-FIA Level 2 homologated, the Tide-K is the glove of choice for drivers who race to win. Sparco Tide-K Kart Racing Glove give kart racers the grip, response, and comfort they need to perform at their best. Built to handle the rigors of competition, they deliver control and style in every lap. The Tide-K has a touch sensitive index finger and thumb for use with touch screen electronic devices such as data logging. External stitch seams and an elastic wrist improves fit and comfort.   Sparco Tide-K Karting Glove Technology Anatomically correct palm that contours to the natural shape of the hand Advanced 3D HTX, a Sparco-exclusive material that increases grip, absorbs vibrations and increases dexterity The hollow volcano shape of the HTX material was specially arranged to increase durability “Touch Sensitive” finger tips compatible with touch screen data acquisition and lap timer apps. Sparco Glove Sizing Chart

Alpinestars KMX-9 v2 Graphic 1 Kart Racing Suit 12/2025 Expiry Certified to CIK-FIA Level 2 homologation standards, the KMX-9 v2 features an aggressive design and vibrant colorways for entry and intermediate level racers. Boasting two-layer construction for protection and low weight, this suit also has a 100% polyester toweling liner for driver comfort. Other driver-friendly design details include an angled front opening, stretch panels on the back, shoulders and waist for an optimized fit, and breathable mesh material on the crotch and underarms. Alpinestars KMX-9 v2 Graphic 1 Kart Racing Suit Protection Certified to CIK-FIA Level 2 homologation standard N 2013-1. Technical two-layer construction that meets the new homologation standard, featuring a twill polyamide outer shell, plus double technical linings for comfort and fit. Engineered for durability, minimal material bunching and high levels of abrasion resistance while the poly-toweling lining offers moisture-wicking properties. Construction Advanced two-layer construction assembly for optimized performance, improved breathability and weight saving. Alpinestars asymmetric front opening design aids fitting. Tech mesh panels positioned on the underarms and seat area for optimized ventilation. Alpinestars Formula 1-derived design and technology shoulder epaulettes. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort with safe closure system. Adjustable waist belt allows a tight personalized fit. Knitted stretchable panels on back shoulder and lumbar area ensure minimal material resistance while driving. Engineered for durability, minimal material bunching and abrasion resistance, while the poly-toweling lining boasts moisture-wicking properties. Key Features Anatomical arm, leg and torso paneling is patterned to create the optimum position while driving. Knitted wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Two thigh pockets offer a convenient storage option for those times away from the driving seat. Premium YKK zipper with personalized zipper pullers, plus double slider for versatile and customizable fit. Comes in two amazing Graphic 1 colorways.

Alpinestars Tech-1 K Start v2 Karting Shoes Built for competitive kart racers who demand lightweight performance without sacrificing support, the Alpinestars Tech-1 K Start v2 Karting Shoes deliver exceptional value and race-day confidence. Whether you're a rising talent or weekend warrior at the kart track, these karting shoes offer advanced materials and ergonomic design features inspired by Alpinestars’ premium footwear range—at a price point perfect for entry-level and amateur drivers. Crafted for durability and breathability, the Tech-1 K Start v2 is your ideal partner for intense kart races and long days in the paddock. Featuring a streamlined microfiber upper with strategically placed perforations, these CIK-FIA Level 1 kart racing shoes promote airflow to keep your feet cool and dry. The dual-closure system combines traditional laces with a secure hook-and-loop strap for precise fit and support, while the textured rubber sole ensures high grip and pedal feel in all conditions. Perfect for use in go-kart racing, track days, or competitive karting events, the Tech-1 K Start v2 is the smart choice for racers ready to take the next step. Own your line and feel every input—these shoes are built to win. Features  CIK-FIA Level 1 certified for sanctioned karting competition Lightweight microfiber upper with perforations for breathability Textured rubber sole designed for excellent grip and pedal feedback Lace and hook-and-loop closure for secure, race-ready fit Optimized for kart racing, track days, and high-intensity kart use Alpinestars Tech-1 Start v2 Karting Shoe Size Chart Alpinestars Tech-1 K Start v2 Karting Shoe FAQs Are the Tech-1 K Start v2 shoes FIA certified?They are CIK-FIA Level 1 certified, making them legal for most karting competitions worldwide. What is the difference between the Tech-1 K Start v2 and the Tech-1 K v2?The Start v2 is a more affordable, entry-level option with similar lightweight features but fewer premium materials than the Tech-1 K v2. Can I use these shoes for indoor karting?Yes, the rubber sole offers excellent grip for both indoor and outdoor kart tracks. Are these karting shoes suitable for kids or youth racers?They are available in a wide size range and may suit youth drivers depending on sizing; check the Alpinestars size chart for best fit. Do they run true to size?Generally yes, but racers with wider feet may consider going half a size up for comfort. Can I use them for sim racing or other motorsports?While designed for kart racing, many drivers use them for sim racing, track days, or even lightweight autocross due to their pedal sensitivity. What size range is available for the Alpinestars Tech-1 K Start v2?The Tech-1 K Start v2 is typically available in European sizes 36 to 48. We recommend using the Alpinestars sizing chart to ensure the most accurate and performance-oriented fit. Can the Tech-1 K Start v2 be used for indoor karting?Yes. The lightweight design, breathable microfiber upper, and grippy rubber sole make the Tech-1 K Start v2 an excellent option for both indoor and outdoor karting environments. Are Alpinestars karting shoes fireproof?No. Karting shoes are not fireproof because CIK-FIA regulations do not require fire-resistant footwear. Fireproof shoes are only necessary for FIA-certified auto racing, not kart racing. Do kart racing shoes improve performance?Absolutely. The Tech-1 K Start v2 enhances pedal sensitivity, control, and comfort, giving drivers better responsiveness and reduced fatigue—crucial for staying competitive on the kart track. How should kart racing shoes fit?Kart shoes should fit snugly with minimal heel or toe movement. A close, supportive fit improves control, pedal feedback, and overall comfort during racing sessions. Do karting shoes stretch over time?They may break in slightly with use but won’t stretch significantly. It’s best to choose a size that feels secure and race-ready right out of the box. How do I clean my Tech-1 K Start v2 karting shoes?Use a damp cloth and mild soap to clean the exterior by hand. Avoid soaking the shoes or using a washing machine, as it can damage the materials and structure. What type of socks should I wear with karting shoes?Use thin, moisture-wicking racing socks to reduce sweat buildup, improve fit, and maintain comfort during long stints behind the wheel. How does the Tech-1 K Start v2 compare to other Alpinestars karting shoes?The Tech-1 K Start v2 offers a great entry-level balance of comfort, grip, and durability. It shares many performance features with higher-end models but comes in at a more accessible price point, making it ideal for new and amateur kart racers.